SCR-A Continuous Reforming Carrier Ccr Catalyst 50 Lbs Al2O3 0.55-0.66 G/Cm3

Pore Size: Medium

Electrical Insulation: Excellent

Crush Strength: 50 Lbs

Mechanical Strength: High

Bulk Density: 0.55-0.66 G/cm3

Surface Area: 200 M2/g

Chemical Resistance: Acids And Bases

Abrasion Resistance: Excellent

Highlight:

ccr catalyst 50 lbs

scr-a carrier ccr

scr-a ccr catalyst

Product Description

Product introduction

SCR - A carrier has high hydrothermal stability, low reactor ratio and high strength, which is suitable for continuous reforming Pt-based catalyst carrier.

Product technical indicators:

Item	Unit	SCR-A target
Al₂O₃	m%	＞98%
BET surface	㎡/g	190±10
Pile ratio	g/ml	0.57±0.02
Crushing strength	N/Each capsule	≥40
Wear rate	%	＜4
Particle size distribution	Φ1.6～1.8mm	＞98%
Defect rate	m%	＜0.3%
Sn/ Al₂O₃	m%	0.31±0.03
Si/ Al₂O₃	ppm	＜200
Fe/ Al₂O₃	ppm	＜200
Na/ Al₂O₃	ppm	＜70

① For bulk ratio and strength test, the sample shall be baked at 600 ℃ for 2 hours and then tested in a dry atmosphere.

② SCR - A support is suitable for manufacturing all continuous reforming catalysts.

Product packaging

The special iron barrel is sealed and packed, and the inner layer is made of moisture-proof plastic bags, with a net weight of 100kg/barrel;

Packed in half-ton bags, lined with moisture-proof material bags, net weight 500 kg/bag.

Precautions for storage, transportation and use

I. Pay attention to waterproof and moisture-proof, and prohibit contact with other chemicals and hydrocarbon substances;

II. Do not drop or roll the iron bucket during handling;

III.. When the product is used, the water absorption should be tested correctly to avoid rapid moisture absorption in wet weather affecting the impregnation load.

PREVIOUS：50 Lbs Crush Strength Abrasion Resistance Alumina Catalyst Carrier Ccr 200 M2/g NEXT：Continuous Reforming Carrier CCR Alumina Carrier SCR-B 1/8 Inch